Inserting the sd card – Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" User Manual
Page 152

Installation and Wiring
152
Inserting the SD Card
NOTE:
As shown in the image below (example on the left-hand side), you can set
the Write-Control Tab to prevent write operations to the SD Card. Push the tab up,
as shown in the example on the right-hand side, to release the lock and enable
writing to the SD Card. Before using a commercial-type SD Card, read the
manufacturer’s instructions.
Step
Action
1
Pull on the tab and open the SD Card cover.
1
Tab
Write-Control Tab
Write disabled
(Enable to read)
Write enabled
(1)
This manual is related to the following products:
- GP4500R - 10.4 Standard HMIs with Rear Mounting Options" GP4400R - 7.5 Standard HMI with Rear Mounting Options" GP4300R - 5.7 Standard HMI with Rear Mount" GP4300M - 5.7 Modular HMI" GP4200M - 3.5 Modular HMI" GP4500 - 10.4 W Model HMI" GP4400 - 7.0 W Model HMI" GP4300 - 5.7 W Model HMI" GP4200 - 3.5 W Model HMI" GP4600 - 12.1 Standard HMIs" GP4500 - 10.4 Standard HMIs" GP4400 - 7.5 Standard HMI" GP4300 - 5.7 Standard HMI" GP4200 - 3.5 Standard HMIs"