Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 44)

Protocol Analysis
34
Easy Data Capture
Make sure that the configuration is set to use Easy Analyzer. See “Creating
Projects” on page 30.
Click the Green button on the main toolbar to open the last saved
project.
New Project
To start a New project:
1. Select File > New and choose Analyzer Host Exerciser Project.
Figure 11 Trigger and Capture Data Dialog Box
2. Click the drop-down arrow next to the Trigger drop-down list box and
choose a trigger. Table 4 on page 42 lists the available trigger selections.
The available triggers are different for High speed and Full/Low speed
operation. All triggering selections, however, are available when the
Analyzer is set to operate in the Auto Speed mode.