Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 160)

OTG Exerciser (Optional)
150
Dropping a Session
A-Device controls the VBus and may drop it at any time. A session for the
OTG Exerciser in this mode ends when the exerciser program completes.
When a session is in progress and VBus is asserted, the Drop Session
button can be active. Stop a session by clicking this button.
Note: There may be cases where the Drop Session button appears never to be
enabled. This occurs in cases where a session is completed in a very short
time. In general this button is enabled in cases with long program loops.
OTG Exerciser as a Peripheral B-Device
To operate the OTG Exerciser as a DRD Peripheral, connect it with a DUT
OTG A-Device, as shown in Figure 111. To operate as a B-Device, plug the
Mini-B side of the cable into the OTG exerciser port.
Figure 111 OTG Exerciser as DRD or Peripheral Device B-Device Connection
- Timing and Clock Distribution
- Real Time Protocol Error and Event Recognition
- High Speed State Machine (Sequencer)
MEMORY MEMORY MEMORY MEMORY MEMORY
INRUSH &
SUSPEND
CURRENT
DIGITIZER &
MEASUREMENT
USB 2.0
ANALYZER
DEVICE
EMULATION
ALL SPEED
USB2.0 AUX.
ANALYZER
HOST DEVICE HOST DEVICE DEVICE DEVICE
ALL SPEED
SBAE-30
MEMORY
OTG
MEMORY
HOST
EXERCISER
HOST
OTG A-Device
OTG
EXERCISER
EXTERNAL CABLE
TIMING
ANALYZER
I
C
I
U
DUT