Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 25)

Installing the Analyzer
15
Conquest M2 External I/O Connector Pin Assignment
The external I/O connector provides the means for accepting a CMOS level
input trigger and 8 CMOS level outputs that represent an 8-bit value.
Conquest External I/O Connector Pin Assignment
Note 1 Pin 1 is the right-most in the cable (Brown) and pin 16 is the left-most in the
cable (Blue).
Note 2 The signal “External out 0” (LSB) is not externally available.
Table 1 External I/O Connector Pin Assignment
Signal Pin Color Signal Pin Color
External Trigger In 1 Brown External Out 7 2 Red
GND 3 Orange External Out 6 4 Yellow
GND 5 Green External Out 5 6 Blue
GND 7 Violet External Out 4 8 Grey
GND 9 White External Out 3 10 Black
GND 11 Grey External Out 2 12 Red
GND 13 Orange External Out 1 14 Yellow
GND 15 Green External Out 0 16 Blue
Table 2 External I/O Connector Pin Assignment
Signal Pin Color Signal Pin Color
No connect 1 Brown No connect 2 Red
GND 3 Orange External out 7 4 Yellow
GND 5 Green External out 6 6 Blue
GND 2 7 Violet External out 5 8 Gray
GND 9 White External out 4 10 Black
GND 11 Brown External out 3 12 Red
GND 13 Orange External out 2 14 Yellow
GND 15 Green External out 1 16 Blue
External out 0 N/A