Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 32)

Launching the USB Analyzer
22
Connecting to a Network
When connected to a network, Conquest must communicate with the DHCP
server to establish a connection. The DHCP server continually sends the next
available IP address to Conquest until the Conquest Protocol Suite software
starts.
When you start the software, the system may prompt to automatically use the
offered IP address or use an assigned IP address. (The assigned IP address
must be on the same network segment as the host computer.) The menu also
allows you to save the selected option (automatic or specific address). If the
assigned IP address is not available, the OS notifies you of an IP address
conflict.
After you click OK, the software searches for all Conquest units connected to
the network and displays a list of available Conquest units. After you select a
Conquest unit, the software assigns the IP address to the selected unit,
completing the connection, and launches the software.
Conquest
Conquest