Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 15)

Introduction
5
Conquest M2 Options
You can expand Analyzer capability with the following options:
Host Exerciser
The Host Exerciser option allows you to generate bus traffic as a host for
analysis.
Device Emulation
This option allows you to operate Conquest M2 as a Device for testing the
USB development system. You can define each Device to include up to 3
configurations with 2 interfaces each and assign up to 7 endpoints to these
interfaces. The Device can be a Low, Full, High, or a High/Full speed device.
OTG Exerciser
This option allows you to operate Conquest M2 as an OTG Dual-Role Device.
In this mode, Conquest M2 is a combination of Device Emulation and
Host Exerciser. A DRD emulation can be either a host or a peripheral.
DC Compliance measurement
This option allows you to measure operational current and inrush current
through a special port over the first 10 milliseconds of Device activation and to
display a pass/fail result with respect to the USB compliance specifications.
This option also allows the measurement of VBus voltage through the
Analyzer port.
Timing Analyzer
This option offers precision timing analysis. The Conquest M2 Timing Analyzer
samples bus signals at different sampling rates depending on the bus speed
selected.