Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 27)

Installing the Analyzer
17
Manual USB Driver Installation
To manually install the USB driver, perform the following:
1. Power up Conquest.
2. Connect the USB cable between the Conquest USB Port interface and
the Host Computer USB port.
3. After Windows detects the new Device, select the Search For Suitable
Driver for My Device option button.
4. Click Next.
5. Choose the Specific location option button and deselect all other option
buttons.
• Click Next.
• Go to the C:\program files\LeCroy\Conquest\usb driver\win2k
folder.
• Choose Ibusb.inf.
• Click OK.
6. Click Next and then Finish to complete the Conquest USB port driver
installation.
Updating the Conquest USB Driver Manually
1. Click Start > Settings > Control Panel > System and click the
Device Manager tab.
2. Find the Test Tools entry.
3. Select and right-click the Conquest board.
4. Select Properties and click the drivers tab.
5. Click Update Driver.
6. Select recommended method
7. Choose the Specific location option button and deselect all other option
buttons.
• Click Next.
• Go to the C:\program files\LeCroy\Conquest\usb driver\win2k
folder.
• Choose Ibusb.inf
• Click OK.
8. Click Next and then Finish to complete the USB driver update.