Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 119)

Performance Analysis
109
Performance Analysis
Conquest has two modes of operation:
• An Easy Mode for immediate Performance Analysis with a minimum of
setup.
• An Advanced Mode allowing you to program a custom performance
analysis.
Note: The Performance Analyzer attempts to present an accurate view of data
performance. In some small time intervals, due to sampling issues, it is
possible that incorrect values will occasionally be presented.
Performance Analysis (Easy Mode)
The Easy Mode offers you the ability to perform a quick Performance Analysis
with a minimum of setup or programming. You can perform a performance
analysis on normal bus traffic or program the exerciser to measure
performance with exerciser generated data.
Click the New Project button on the main toolbar to open the Project Setup
dialog and click Performance Analyzer.
Check the Performance - Easy option and then the Create Project button to
open a Performance Analysis project.
Note: Easy mode allows you to choose to run with either the
Host Exerciser - Easy Option or the Host Exerciser - Advanced Option.