Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 139)

Device Emulation (Optional)
129
Device Emulation (Optional)
This mode allows you to operate Conquest M2 as a Device for testing the USB
host operation. Conquest M2 can be a Low, Full, High, or a High/Full speed
Device. Each Device can include up to three configurations with two interfaces
each. You can assign a total of seven endpoints to these interfaces. Figure 98
shows a functional connection for the Conquest M2 operating as a Device.
Conquest M2 allows two ways to set up as a device:
•
Easy Mode: Requires minimum setup.
• Advanced Mode: Offers more powerful device emulation by allowing you
to define custom responses to different commands.
Figure 98 Conquest M2 Operating as a Device Functional Connection
ALL SPEED
USB2.0 AUX.
ANALYZER
- Timing and Clock Distribution
- Real Time Protocol Error and Event Recognition
- High Speed State Machine (Sequencer)
MEMORY MEMORY MEMORY MEMORY MEMORY
INRUSH &
SUSPEND
CURRENT
DIGITIZER &
MEASUREMENT
USB 2.0
ANALYZER
DEVICE
EMULATION
HOST DEVICE HOST DEVICE DEVICE DEVICE
ALL SPEED
SBAE-30
MEMORY
OTG
MEMORY
HOST
EXERCISER
HOST
OTG
EXERCISER
DEVELOPMENT
SYSTEM
I
C
I
U
I
C
TIMING
ANALYZER