Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 161)

OTG Exerciser (Optional)
151
Define the Device
You can define the OTG Exerciser to be an SRP only capable peripheral or to
include HNP support as well. To define the device:
1. Enable/Disable OTG Exerciser B-Device SRP and/or HNP response by
checking or unchecking the corresponding check boxes in the Device
Mode Dialog.
You can alternatively set these responses in the OTG Descriptor dialog by
changing the bit assignment directly. Disabling HNP Support also causes the
OTG Exerciser to stall the SetFeature(b_hnp_enable) request. Disabling SRP
Support has no side effects.
Figure 112 Selecting SRP/HRP in the OTG Descriptor Dialog
2. Assign the Device speed from the Device Speed drop down list as Full,
or High. Note that the speed selection must match that of the DUT.