Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 31)

Launching the USB Analyzer
21
If Conquest is not detected, the software displays the Hardware Not
Detected message.
Multiple Analyzers
If you have multiple Analyzers installed, you get the following message. In
such cases choose the Analyzer and click Attach.
Connecting via Ethernet
You can use the ethernet connection using any one of the following three
supported configurations:
1. Conquest connected to a network via a hub, switch, or similar device.
2. Conquest connected to the host computer (machine running the
application software), via a hub, switch or similar device.
3. Conquest connected directly to the host computer using a crossover
cable.