Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 40)

Launching the USB Analyzer
30
Creating Projects
The Conquest M2 Analyzer allows you to create projects using Easy and
Advanced mode capabilities in any combination.
Click the New Project button on the main toolbar to display the
Project Setup dialog.
Click the project type and configure the project to define Easy and/or
Advanced mode operation as applicable.
Capture and Timing Analysis Projects
See page 33 for setup of an Easy Mode Capture.
See page 55 for setup of an Advanced Mode Capture.
See page 46 for setup of an Easy Mode Exerciser.
See page 67 for setup of an Advanced Mode Exerciser.
See page 123 for setup of Easy and Advanced Mode Timing Analysis.