Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 189)

Display Manipulation
179
Waveform Display
You can open a Waveform display that corresponds to the packet at the
X-cursor position by right-clicking in the data display area and choosing
Show Wave.
Figure 139 Wave Display Selected
Clicking the Show/Hide Waveform button displays or hides the
waveform display.
T1, T2 Pointers
The Waveform display shows each transmitted bit level and incorporates T1
and T2 pointers that allow the measurement of the number of bits between
different locations in the waveform display.
Lost Pointers
When scrolling through a long wave display, you may lose the T1 and T2
pointers. To rapidly return to a pointer, click either the
T1 or T2 Scroll to Pointer Page button on the wave display tool bar.