Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 19)

Receiving the Analyzer
9
Receiving the Analyzer
Conquest M2
The Conquest M2 Analyzer includes the following components:
• Carrying Case
• Conquest M2 identified in the packing list
• Software on the CD Rom
• DB-25 -> SCSI II 26, Parallel Port connection
• Two USB 2.0 Cables, 1.8 meter
• USB 2.0 Cable, 4” (10 cm)
• Two USB 2.0 Cables, 2 meter Standard - A to Mini - B
• One Mini - A to Standard - B.
• 3M Ethernet Cable
• External I/O Ribbon and External Clock SMB to BNC Cables
• Current Measurements Calibration Board
• Power cable
• User Manual (PDF version on CD only) for both Conquest and
Conquest M2
Conquest
The Conquest Analyzer includes the following components
•
Carrying Case
• Conquest identified in the packing list
• Software on the CD Rom
• Two USB host interface cables, 1.8 M A to Mini - B
• USB, A to B cable, 4” (10cm)
• 3M Ethernet Cable 10ft (3M)
• External trigger cable (SMB2BNC)
• External signals cable
• Power cable, 6ft (1.8M)
• User Manual
Unpacking the Analyzer
Inspect the received shipping container for any damage. Unpack the container
and account for each of the system components listed on the accompanying
packing list. Visually inspect each component for absence of damage. In the
event of damage notify the shipper and LeCroy. Retain all shipping materials
for shippers inspection.