Teledyne LeCroy PXA125 - Manual (Page 89)

User Manual PXA125
ArbConnection 3-75
Figure 3-44. The Wave Composer Opening Screen
File Commands The File command has 4 commands that control waveform files. Also
use this command to print the active waveform, or exit the wave
composer program. Description of the various commands under File
is given below.
New Waveform
The New Waveform command clears current waveform from the
screen. If you made changes to the waveform area and use the New
Waveform command, you should save your work before clearing the
screen. The New Waveform command is destructive to the displayed
waveform.
Open Waveform…
The Open Waveform… command will let you browse your disk for