Teledyne LeCroy PXA125 User Manual
Page 171
User Manual PXA125
Programming Reference 4-53
Parameter type
Numeric
Parameter range
0 to 99.9 in units of percent
RAMP:DELay?
Response and default
The PXA125 will return the present delay value. Default value is 0.
RAMP:TRANsition
Purpose
This command programs ramp transition from low to high of the standard ramp waveform. This command has
no affect on arbitrary waveforms.
•
Parameter type
Numeric
Parameter range
0 to 99.9 in units of percent
RAMP:TRANsition?
Response and default
The PXA125 will return the present rise time value. Default value is 60.
RAMP:TRANsition:TRAiling
Purpose
This command programs ramp transition from high to low of the standard ramp waveform. This command has
no affect on arbitrary waveforms.
•
Parameter type
Numeric
Parameter range
0 to 99.9 in units of percent
RAMP:TRANsition:TRAiling?
Response and default
The PXA125 will return the present fall time value. Default value is 30.
SINC:NCYCleN_cycles>
Purpose
This command programs the number of “0-crossings” of the standard SINC pulse waveform. This command
has no affect on arbitrary waveforms.
•
Parameter type
Numeric (integer only)