Teledyne LeCroy PXA125 User Manual

Page 153

User Manual PXA125

Programming Reference 4-35

•

sets the output frequency in units of hertz

•

sets the output amplitude in units of volts

•

sets the output offset in units of volts

•

sets the delay to the pulse rise transition in units of %

•

sets the pulse rise time in units of %

•

sets the pulse high time in units of %

•

sets the pulse fall time in units of %

Parameter type

Numeric

Parameter range

10e3 to 50e6

80e-3 to 8

-3.6 to +3.6

0 to 99.9

APPLy:PULSe?

Response
The PXA125 will return , ,,,,,.
Default values are

1e6,5,0,10,10,10,10

APPLy:RAMP{,,,,,}

Purpose
This command is a high-level command that programs the PXA125 to output ramp waveform along with its
associated parameters

•