Teledyne LeCroy PXA125 - Manual (Page 182)

User Manual PXA125
Programming Reference 4-64
will not interfere with synchronization:
1. Changing output state on/off
2. Changing sync output state on/off
3. Changing sync validation bit/lcom
4. Modifying amplitude and offset
5. Modifying sample clock frequency
In the following you’ll find a list of operation that will interfere with
synchronization:
1. Changing waveform type fix/user/sequence
2. Downloading waveforms
3. Modifying sync position and width
4. Modifying trigger burst count, phase and advance source
5. Modifying phase offset between instruments
6. Modifying frequency setting in fixed waveforms mode