Teledyne LeCroy PXA125 - Manual (Page 177)

User Manual PXA125
Programming Reference 4-59
The PXA125 will return the present designated TTLT line state: 1 if the SYNC output is on, or 0 if the SYNC
output is off. Default value is 0.
OUTPut:STAR{OFF|ON|0|1}
Purpose
The STAR pin at the P2 is normally used as an input. STAR triggers are sourced from a STAR module that is
plugged in slot 2 however, by making the STAR pin output, the instrument can send trigger information that
can be interpreted as status information by the STAR module.
•
ON or 1 will convert the STAR line to output and will place a SYNC pulse on this line
•
OFF or 0 will set the STAR line output off, the Sync pulse removed and the line converted to high-
impedance, tri-state.
Parameter type
Discrete
OUTPut:STAR?
Response and default
The PXA125 will return the STAR line state: 1 if the STAR is on (output), or 0 if the STAR is off (input).
Default value is 0.