Teledyne LeCroy PXA125 - Manual (Page 168)

User Manual PXA125
Programming Reference 4-50
VOLTage?
Response to query version
The PXA125 will return the present amplitude value. The returned value will be in standard scientific format
(for example: 100mV would be returned as 100E-3 – positive numbers are unsigned). Default value is 5.
VOLTage:OFFSet
Purpose
This command programs the amplitude offset of the output waveform. The offset is calibrated when the
source impedance is 50
Ω .
•
sets the amplitude offset
Parameter type
Numeric
Parameter range
-3.6 to +3.6 in units of volts
VOLTage:OFFSet?
Response and default
The PXA125 will return the present offset value. The returned value will be in standard scientific format (for
example: 100mV would be returned as 100E-3 – positive numbers are unsigned). Default value is 0.
SINusoid:PHASe
Purpose
This command programs start phase of the standard sine waveform. This command has no affect on arbitrary
waveforms.
•
sets the start phase
Parameter type
Numeric
Parameter range
0 to 360 in units of degrees
SINusoid:PHASe?
Response and default
The PXA125 will return the present start phase value. Default is 0.
TRIangle:PHASe
Purpose
This command programs start phase of the standard triangular waveform. This command has no affect on
arbitrary waveforms.
•
sets the start phase
Parameter type
Numeric