Teledyne LeCroy PXA125 - Manual (Page 154)

User Manual PXA125
Programming Reference 4-36
APPLy:RAMP?
Response
The PXA125 will return , ,,,,. Default values are
1e6,5,0,10,10,10
APPLy:SINC{,,,}
Purpose
This command is a high-level command that programs the PXA125 to output sinc waveform along with its
associated parameters
•
sets the output frequency in units of hertz
•
sets the output amplitude in units of volts
•
sets the output offset in units of volts
•
sets the number of zero crossing
Parameter type
Numeric
Parameter range
10e3 to 50e6
80e-3 to 80
-3.6 to +3.6
4 to 100
APPLy:SINC?
Response
The PXA125 will return , ,,. Default values are
1e6,5,0,10
APPLy:EXPonential{,,,}
Purpose
This command is a high-level command that programs the PXA125 to output exponential waveform along
with its associated parameters
•
sets the output frequency in units of hertz
•
sets the output amplitude in units of volts
•
sets the output offset in units of volts
•
sets the exponent value
Parameter type
Numeric
Parameter range
10e3 to 50e6
80e-3 to 80
-3.6 to +3.6
-20 to +20
APPLy:EXPonential?
Response
The PXA125 will return , ,,. Default values are
1e6,5,0,1