Teledyne LeCroy PXA125 User Manual
Page 170
User Manual PXA125
Programming Reference 4-52
Parameter range
PULSe:WIDTh?
Response and default
The PXA125 will return the present width value. Default value is 10.
PULSe:TRANsition
Purpose
This command programs pulse transition from low to high of the standard pulse waveform. This command
has no affect on arbitrary waveforms.
•
Parameter type
Numeric
Parameter range
0 to 99.9 in units of percent
PULSe:TRANsition?
Response and default
The PXA125 will return the present rise time value. Default value is 10.
PULSe:TRANsition:TRAiling
Purpose
This command programs pulse transition from high to low of the standard pulse waveform. This command
has no affect on arbitrary waveforms.
•
Parameter type
Numeric
Parameter range
0 to 99.9 in units of percent
PULSe:TRANsition:TRAiling?
Response and default
The PXA125 will return the present fall time value. Default value is 10.
RAMP:DELay
Purpose
This command programs delay of the standard ramp waveform. This command has no affect on arbitrary
waveforms.
•