Teledyne LeCroy PXA125 - Manual (Page 45)

User Manual PXA125
Installation 2-31
The next step is necessary to verify that the device driver was
installed properly and is displayed correctly in the System Device
Manger. Do the following:
1. Click on the Start button, then Settings and then Control Panel.
2. In the Control Panel dialog box, find the icon labeled System.
3. Double click on the System icon and then on the Hardware
4. On the Hardware tab click on the Device Manager button.
5. Click on LeCroy. If you installed the driver properly, your device
manager should show the Arbitrary Waveform Generator Model
PXA125 as shown in figure 2-15.
Figure 2-15 – Device Manager
Click on “X” to remove the System Properties dialog box from the
screen.