Teledyne LeCroy PXA125 - Manual (Page 30)

Chapter 2
INSTALLATION
Installation
Overview
This chapter contains information and instructions necessary to
prepare the Model PXA125 for operation. Details are provided for
initial inspection, grounding requirements, repackaging instructions for
storage or shipment and installation information.
Unpacking and
Initial Inspection
Unpacking and handling of the generator requires normal precautions
and procedures applicable to handling of sensitive electronic
equipment. The contents of all shipping containers should be checked
for included accessories and certified against the packing slip to
determine that the shipment is complete.
Safety
Precautions The following safety precautions should be observed before using this
product and associated computer. Although some instruments and
accessories would normally be used with non-hazardous voltages,
there are situations where hazardous conditions may be present.
This product is intended for use by qualified persons who recognize
shock hazards and are familiar with the safety precautions required to
avoid possible injury. The following sections contain information and
cautions that must be observed to keep the PXA125 operating in a
correct and safe condition.
CAUTION
For maximum safety, do not touch the product, test
cables, or any other instrument parts while power
is applied to the circuit under test. ALWAYS
remove power from the entire test system before
connecting cables or jumpers, installing or
removing cards from the chassis. Do not touch any
object that could provide a current path to the
common side of the circuit under test or power line
(earth) ground. Always keep your hands dry while
handling the instrument.