Teledyne LeCroy PXA125 - Manual (Page 101)

User Manual PXA125
ArbConnection 3-87
Figure 3-50. The FM Composer Opening Screen
File Commands The File command has 4 command lines that control waveform files.
Also use this command to exit the FM composer program. Description
of the various commands under File is given below.
New Waveform
The New Waveform command will remove the waveform from the
screen. If you made changes to the waveform area and use this
command, you should save your work before clearing the screen. The
New Waveform command is destructive to the displayed waveform.
Open Waveform…
The Open Waveform… command will let you brows your disk for
previously saved waveform files and load these waveforms to the
waveform area. This command is also very useful for converting
waveform files to format that is acceptable by the Wave Composer.
The Open Waveform command can convert ASCII. *ASF (space