IAI America ISPDACR-ESD - Manual (Page 83)

75
12. Motor Replacement Procedures
x Standard home specification (home on the motor side)
Type
Distance between the inner end
face of the motor bracket and end
face of the slider
Without intermediate support Lead 10 mm 95 mm
Lead 20 mm 105 mm
Lead 40 mm 105 mm
Lead 25 mm 85 mm
Lead 50 mm 85 mm
With intermediate support Lead 20 mm 96 mm
Lead 40 mm 116 mm
Lead 25 mm 101 mm
Lead 50 mm 76 mm
x Reversed-home specification (home on the counter-motor side)
Distance between the end face of the slider and
end face on the inner side of the front cover
Without intermediate support --- 57 mm
With intermediate support --- 140 mm
57 mm (or 140 mm if there is
an intermediate support)
Slider
Draw a countermark along the same line
on the end face of the motor bracket.
Adjust the distance between the inner end
face of the motor bracket and end face of
the slider so that the coupling affixing bolt
comes directly above the slider.
Adjust the distance between the end face of the slider
and inner end face of the front cover so that the
coupling affixing bolt comes directly above the slider.
Slider