IAI America ISPDACR-ESD - Manual (Page 63)

55
10. Maintenance/Inspection
10.7.2 ISDCR/ISPDCR/ISDACR/ISPDACR
Applicable Grease
Our guides use urea grease that offers excellent low-dust-raising property, stable torque characteristics,
excellent lubrication performance, and rust-preventive effect similar to lithium grease. The following grease
has been applied to the guides of your actuator prior to shipment from IAI.
Kuroda-predision Co. Kuroda C grease
Warning: If your actuator is of cleanroom type, use low-dust-raising grease. If standard grease is
used, dust may be raised.
Never use fluorine or lithium grease. If fluorine or lithium grease is mixed with urea
grease, the lubrication performance normally expected from urea grease may be lost
and consequently the mechanical parts may be damaged or cleanliness may drop.
Grease Supply Method
Grease nipples are provided on the side of the slider, so add grease for the guide from these nipples.
[1] Remove the lubrication covers on both sides of the slider cover.
[2] Squirt in grease of the blend specified by IAI from the grease nipples. Two grease nipples are
available, one each on the left and right. They are used to grease the left and right guides,
respectively.
Guide (right)
Guide (left)
Motor
end