IAI America ISPDACR-ESD - Manual (Page 61)

53
10. Maintenance/Inspection
10.6 Cleaning the interior
x Wipe off dirt with a soft cloth.
x If constituents of grease have separated and base oil has accumulated on both ends of the guide rail,
wipe off the oil using a soft cloth, etc. If the accumulated oil is not wiped off, it may seep out to the
exterior of the actuator.
x Do not spray compressed air on the actuator that might force dust into the crevices.
x Do not use petroleum-based solvents, neutral detergents or alcohol.
Caution: If grease contains a large amount of foreign matter, be sure to wipe off the dirty grease
before adding new grease.
10.7 Adding Grease
10.7.1 ISD/ISDA/ISPDA
Applicable Grease
Lithium grease No. 2 is used.
The following blends of grease are charged before shipment from IAI.
Idemitsu Kosan Daphne Eponex GreaseNo.2
Equivalent grease blends are also available from various companies. For details, inform the name of the
above grease to your supplier and ask them to select an equivalent product. Examples of equivalent
products are shown below.
Showa Shell Sekiyu Albania GreaseNo.2
Mobil Sekiyu Mobilux 2