4 how to use the homing mark stickers – IAI America ISPDACR-ESD User Manual
Page 50

42
7. Setting the Home Position
7.4
How to Use the Homing Mark Stickers
Attach these stickers to the product, as necessary, to indicate the home direction of the actuator, etc.
Examples of use
[1] For marking the home direction of the actuator
[2] As positioning marks
[3] For displacement check
x Attach two stickers when the actuator is stopped at home.
Sticker details
x 1 sheet
Homing mark stickers
Graduation mark sticker x 4
(The graduations are provided for 10 mm at a 1-mm pitch.)
Attach to the slider.
Attach to the base.
Attach at desired moving positions.
Attach on the home side of the base.
Motor
Mark sticker x 4
• Remove each sticker from the backing paper when use.
Notes 1. The back side is adhesive.
2. Remove dirt and oil from the attaching surface beforehand.
3. Avoid attaching the stickers over the caution labels.
Motor
Attach to the slider.
Attach to the slider.