IAI America ISPDACR-ESD - Manual (Page 81)

73
12. Motor Replacement Procedures
12.2 Replacing the Motor of the ISDACR/ISPDACR Series
“What you need for replacement”
x New motor (with a coupling on the motor
shaft, as shown in the photograph on the
right)
Caution: Never remove this coupling.
Motor models: 600-watt incremental specification
TS4613N1023E200
600-watt absolute specification
TS4613N2032E200
750-watt incremental specification
TS4614N1023E200
750-watt absolute specification
TS4614N2032E200
x Allen wrench set x Scale x Oil-based marker pen x Waste cloths x Industrial alcohol
[Steps]
(1) Use a thin oil-based marker pen to draw countermarks on the stainless sheet and side cover near the
motor end. (These marks will be used as a reference when putting back the removed sheet.)
(2) Use an Allen wrench of 2.5 mm across flats to remove the hexagonal socket head button bolts that are
affixing the stainless sheet retainer plate and side cover.