Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 81)

Section 4: Input/ Output
2/2013 81 51303 Rev. 1
5.3. FORMAT TICKETS, CONTINUED
 TOP / LEFT: Plots the x-y coordinates of
where the fields are located.
– TOP field moves the data field in an up
and down position.
▪ This value is incremented in tenths (0.1) of an
inch.
– LEFT field moves the data field in a left to
right direction.
▪ This value is incremented in tenths (0.1) of an inch.

HEIGHT / WIDTH: These two fields establish the font size of the data which
has been selected. Care should be taken when changing these data fields. The
characters can be distorted if the ratios of the default settings are not maintained.

DEFAULT – HEIGHT / WIDTH: 0.1 0.6 CHANGE TO
HEIGHT / WIDTH: 1.1 1.6.
 ENHANCED : Touch the data entry box on the screen to the right of
Enhanced: and select Yes or No to enable or disable the emphasized print.
 PRINTED : Touch the data entry box on the screen to the right of Printed: and
select Yes or No to enable or disable the printing of the data item.
 Press the SAVE CHANGES button when any changes are made otherwise the changes
will be lost.
 Selecting BACK : FORMAT TICKET returns to the Format Ticket.