Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 121)

Section 6: Service & Maintenance
2/2013 121 51303 Rev. 1
7.2. REMOTE CONFIGURATION ACCESS
The FB2550 DAT may be configured by remote access. A connection to the local
network can provide access to the FB2550 by any computer on the network.
– This access may be allowed or denied at the instrument by the operator or
supervisor.
 Another method of remote configuration is done by connecting directly to the
FB2550 DAT using a crossover network cable.
– The menus presented can be in a Web format or displayed exactly as it
appears locally at the instrument.
 The FB2550 Instrument must be connected to a network or direct connected
using a crossover network cable to a computer.
 The FB2550 must have the Network parameters configured.
NOTE: See Section 8.12. for Network Parameter Configurations.
1. From the Configuration Menu, open
INTERNET EXPLORER
on the computer.
2. Type in the
IP ADDRESS
of the FB2550
DAT into the Address bar.
– Sample:
http: //192.168.xxx.xxx.
– The
Configuration Home window
will
appear as shown.
3. Select
LOGIN
.
4. Enter the Supervisor Password.
5. Press the LOGIN button.
– Wait for confirmation from the FB2550
DAT.