Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 119)

Section 6: Service & Maintenance
2/2013 119 51303 Rev. 1
7.1.3. RE-INDEX DATABASE
A. PROCEDURE TO RE-INDEX DATABASE:
1. Select LOGIN .
2. Enter the Supervisor Password.
3. Select CONFIGURATION MENU .
4. Select DATABASE MAINTENANCE .
5. Press PAGE FORWARD once.
6. Select RE-INDEX DATABASE .
NOTE: A warning will display of whether or not to proceed.
This process could take several minutes.
7. Press CONTINUE button to complete the
process, or press the CANCEL button to
stop the procedure.
8. When the Database Re-Index process is
complete, press the CONTINUE button to
return to the Database Maintenance menu.
 Press RETURN TO WEIGHING to exit to
the Weigh Processing Screen.