Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 53)

Section 3: Configuration Menu
2/2013 53 51303 Rev. 1
4.4.3. METHOD 1, CONTINUED
7. Select the LOAD button.
– This selection will bring up a menu a five
(5) pre-configured outputs
.
8. When configuring an output data string, the
Fairbanks’ FB2550 DAT has seven (7)
commonly used pre-configured outputs.
9. Select the correct data string type.
Displayed below are the data string protocols. *
FAIRBANKS
Toledo
Cardinal
Weightronix < >< >
Condec
DT7000 Anybus
NW> >
SMA Protocol
*
See
Appendix II: Data Output for further information.