Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 125)

2/2013 125 51303 Rev. 1
Section 8: Network Application Configuration
8.1. INTRODUCTION
Some of the application uses are listed below.
 Customers with different scales at one site, can weigh in using one scale, then
weigh out with another.
 Customers need to process transactions on the same scale from two different
locations, such as the scale house during the day, and the guard house at night.
 Customers who need monitoring weighs on multiple scale platforms from a
remote location.
 Customers processing weights from Instruments in Hostile Environment
Enclosures mounted outside, and then produce and print reports from a standard
unit in an office environment.
8.2. STANDARD NETWORK SETUP
Up to five (5) FB2550 DAT
can be networked together using up to one (1) scale
platform .
– Each of the FB2550 DAT becomes a Terminal on the network. Each Terminal
can display its own weight or process transactions for scale 1 on the network.
–
– Peripheral devices, such as printers and remote displays, can be connected
locally, or to any Terminal on the network.