Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 55)

Section 3: Configuration Menu
2/2013 55 51303 Rev. 1
4.4.3. METHOD 1, CONTINUED
13. Enter the SETTINGS menu to configure
the settings as required.
14. Touch the data field to the right of the
Mode legend and a list of items will appear
from which a selection is made.
 MODE – This field determines how the
data is transmitted.
 OFF – COM port is disabled.
 CONTINUOUS – The COM port
transmits the data string continuously per
every display update.
 DEMAND – The data string is
transmitted upon receiving the
programmed poll character from a peripheral device.
 AUTO – The data string is transmitted upon the printing of a transaction.
 NETWORK (CONTINUOUS) - The data string is transmitted continuously
per every display update through the network connection.
 NETWORK (AUTO) - The data string is transmitted upon pressing print and
the printing of a transaction will transmit the transaction through the network
connection.
15. Touch the data field to the right of the
Baud legend and a list of items will appear
from which a selection is made.
16. Select the required BAUD rate from the
menu list.