Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 49)

2/2013 49 51303 Rev. 1
Section 4: Configuration Menu
4.1 LEVELS OF SECURITY
STANDARD USER OR W&M OFFICIAL ACCESS
– No password required.
– First Level Users can access these menus.
▪ HOME ▪ AUDIT TRAIL
▪ OPERATOR MENU ▪ RETURN TO WEIGHING
SUPERVISOR ACCESS
– Supervisor Password is required.
– It is suggested to change this password upon installation.
– Supervisor level users can also access the CONFIGURATION MENU .
4.2. LOGGING IN – SUPERVISOR ACCESS
1. Press ALT + HOME to access the
programming menus.
2. Select LOGIN.
3. Enter the Service PASSWORD .
4. Click the LOGIN button.

DEFAULT FIRST TIME USE
PASSWORD FOR THE
SUPERVISOR ACCESS IS
“1”
.