Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 77)

Section 4: Input/ Output
2/2013 77 51303 Rev. 1
5.2. PROGRAMMING THE PRINTER, CONTINUED
10. Set the data protocol for the COM Port,
including the PRINTER, BAUD RATE,
PARITY, DATA BITS and STOP BITS .
The FB2550 DAT will indicate the port has been
set and the defaults loaded.
11. If this is the first time the printer is installed on the Indicator, load the PRINTER
DEFAULT FORMATS
by pressing the YES button.
12. Press the SAVE CHANGES button on the touch screen display to complete
the Printer configuration.
 Select BACK: CONFIGURATION MENU to return to the Configuration
Menu .
13. Connect the printer cable to the printer and the configured COM port.