Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 60)

Section 3: Configuration Menu
2/2013 60 51303 Rev. 1
4.4.4. METHOD 2 , CONTINUED
12. Touch the screen under DATA TYPE to
select a data item to edit.
There are many items available to select in
order to edit the particular data item selected.
Listed below are the available choices.
 TEXT –
Allows text entry values in the
location.
 UNITS TOKENS – Designates the unit
of the data such as lbs or kgs.
 MODE TOKENS – Designates if the
weight is Gross, Tare, or Net.
 SCALE STATUS – Designates the
operating status of the scale such as
motion, overcapacity, and behind zero.
 LOAD CELL STATUS – Designates if
a load cell has a potential problem.
 STATUS BYTE A, B or C – Similar to Scale Status item but also includes
graduation size, decimal point, and units.
 GROSS WEIGHT, TARE WEIGHT, NET WEIGHT –Weights retrieved
from the scale selected for the data item configured.
 DISPLAYED WEIGHT – Value which is currently shown on the display.
 <> - Removes the data item selected from the data string
configuration.
