beautypg.com

Video camera setup, Installing the camera without factory defaults, Necessary tools – Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL User Manual

Page 103: Cable, Data cable, Power supply

background image

Section 5: Accessories

2/2013

103

51303 Rev. 1

POWER CABLE

DATA IN

– Either Crossover to

COMPUTER,

OR Straight-thru Cable to

SWITCH.

DATA IN + POWER

Cable to

0

.

6.3. VIDEO CAMERA SETUP

NECESSARY TOOLS

Laptop computer with rights to change the IP Address.

Ethernet Cable with either of the following:

Crossover cable direct to the pc and camera.

OR…

Straight-through cables, switch, pc and camera.

NOTE:

It is strongly advised to review all the elements of the Video Camera, and

fully study these instructions before altering this unit.

6.3.1. INSTALLING THE CAMERA WITHOUT FACTORY

DEFAULTS

1. Plug in the

PoE

CABLE

(Power over Ethernet) into the Video Camera.

2. Plug in the

DATA CABLE

to the Power Supply, either from a computer or

local switch.

3. Connect the

POWER SUPPLY

.