Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 20)

Section 2: Operations
2/2013 20 51303 Rev. 1
2.4. OPERATIONAL PROCEDURES
2.4.1. BASIC OPERATIONS SUMMARY
GROSS WEIGHING
1. Drive the vehicle to be weighed on the
platform.
2. Once the display stabilizes, press the
PRINT key.
– A Gross Weight ticket prints.
GROSS-TARE-NET WEIGHING
1. Drive the vehicle to be weighed on the
platform.
a. Press either the KEY TARE or TARE
button.
b. If KEY TARE is selected, enter the known
Tare Weight on the keypad.
c. If TARE is selected, the weight on the
display is captured as a Tare Weight.
2. Load the vehicle with product.
3. Press the PRINT key and a Gross-Tare-Net Ticket will be printed.
– Mode Change – When a KEY TARE or TARE button is pressed, the scale
automatically switches from the Gross Weighing Mode to the Gross-Tare-
Net Mode
.
4. To change the scale from the Gross-Tare-Net Mode back to the Gross Weighing
Mode, press KEY TARE .
NOTE: If the display shows cell(s) failure, this indicates an error on the platform.
Check the platform for equipment, debris, or other materials and remove them. If this
does not resolve the condition, call for service.