Fairbanks FB2550 DAT SERIES DRIVER ACCESS TERMINAL - Manual (Page 66)

Section 3: Configuration Menu
2/2013 66 51303 Rev. 1
4.6. IP OUTPUT CONFIGURATION
The IP Output is available using the Ethernet connection of the FB2550 DAT
– Follow these sections to configure the Communication Data String Protocol.
– The MODE selection configures the Network (Continuous) or Network
(Auto).
– The final step of the IP Configuration is assigning the communication
parameters for the device on the Network.
1. Using an external keyboard, press ALT +
HOME .
2. Select LOGIN.
3. Enter the Supervisor Password.
4. Open the CONFIGURATION MENU.
5. Press PAGE FORWARD once.
6. Select CONFIGURE OUTPUTS.
7. Touch the screen to select IP SETUP ,
which configures the FB2550 DAT.