Burkert Type 8640 - Manual (Page 89)

89
Configurationandparameter
settingsforProfinetIO
16.2. Parameter settings for the PROFINET IO slave
The parameters for the PROFINET IO slave can be set either via the user interface of the project configuration
software (such as STEP7) or by acyclic object access.
16.2.1. Parameter setting based on the example of STEP7
Double-click on the "HeadUnit" (slot 0) to open a new window and access the parameters.
Figure 63: Parameter settings for the PROFINET IO slave via STEP7
english
Type 8640