Extron Electronics SMX System User Guide - Manual (Page 99)

SMX System MultiMatrix Switcher • HTML Configuration and Control 93
Date/Time Settings fields
The Date/Time Settings section (see figure 52) provides a location for viewing and setting
the time functions.
Figure 52. Date/Time Settings Fields
Change the date and time settings as follows:
1. Click the drop-down box for the desired variable. The adjustable variables are month,
day, year, hours, minutes, am/pm, and (time) zone (see figure 52).
2. Click the scroll up or down buttons until the desired variable is visible.
3. Click on the desired variable.
NOTES:
• If setting the time, set the local time. The Zone variable allows you to then enter
the offset from Greenwich Mean Time (GMT).
• The Zone field identifies the standard time zone that has been selected and
displays the amount of time, in hours and minutes, that the local time varies from
the GMT international time reference.
4. Repeat steps 1 through 3 for other variables that need to be changed.
5. Select the appropriate Daylight Saving radio button. To turn off daylight savings time,
select Off .
NOTE: When daylight savings time is enabled, the switcher updates its internal
clock between Standard Time and Daylight Savings Time in the spring and fall on
the date that the time change occurs in the United States of America and parts of
Europe and Brazil. When daylight savings time is turned off, the switcher does not
adjust its time reference.
6. Click the Submit button at the bottom of the Date/Time Settings section to implement
the selections.