Extron Electronics SMX System User Guide User Manual

Page 70

SMX System MultiMatrix Switcher • SMX Control Software

•

Restore Matrix settings from... — Select this option to restore saved matrix settings
files (*.mtx) and overwrite the current settings.

NOTE: All current settings (ties, presets, virtual plane, and audio settings) unless

already saved, are replaced.

•

Save This-Session’s settings — Select this option to save the specific session
settings (ties, presets, rooms, and audio settings) to file (*.ini), which can be used for
restoring those settings later.

NOTE: The last saved settings within the same *.ini file are overwritten.

•

Restore the Last-Session’s settings — Select this option to restore the last session
settings from a saved file (

.ini).

NOTE: The current settings (ties, presets, rooms, and audio settings) are

overwritten by the restored settings.

•

Select Printer — Selecting this opens a second drop-down list listing the available
printers connected to the PC.

•

Print Tie Map — Select this option to print the tie map in the active window to the
default or currently selected printer.

•

Exit — Select this option to close the SMX control program. Current settings are
maintained and loaded upon restart.

NOTE: Alternatively, click on the red X in the top right corner of

the main window to close the SMX Control Program.

Tools Menu

This drop-down list (see figure 33) includes the following items:

Assign Device Icons

Edit Device Palette

RGB Delay settings

Audio-Input Gain settings

Audio-Output Volume settings

Mute-Output settings

HD-SDI Re-clocker

Rate settings

EDID settings

HDCP Status

USB Settings/Status

View Input

Frequencies

Update Firmware...

IP Options

HTML File Manager

Hardware

Status

Physical Switchers config

Virtualize...

, and

Name Presets

Figure 33.

Tools Menu