Extron Electronics SMX System User Guide - Manual (Page 49)

SMX System MultiMatrix Switcher • SIS Configuration and Control 43
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
View Ties
NOTE: If the view follow-all tie command (!) is used for an output with a break-away tie, the SMX will respond with an
error message (E14).
View RGBHV output tie X2@ * X# & X@]
X2@ Out X# • In X@ • RGB ]
View RGBHV input tied to output X#
on plane X2@ .
Verbose mode 2 or 3
View video output tie X2@ * X# % X@]
X2@ Out X# • In X@ • Vid ]
View video input tied to output X# on
plane X2@ .
Verbose mode 2 or 3
View audio output tie X2@ * X# $ X@]
X2@ Out X#• In X@• Aud ]
View audio input tied to output X# on
plane X2@ .
Verbose mode 2 or 3
RGB/Video Mute by Plane
RGB/video mute X2@ * X# *1B X2@ Vmt X# *1 ] Mute RGB/video output X# .
RGB/video unmute X2@ * X# *0B X2@ Vmt X# *0 ] Unmute RGB/video for X# .
Read RGB/video mute X2@ * X# B X(] Read RGB/video output X# .
RGB/video mute entire plane X2@ *1*B X2@ Vmt00*1 ] Mute RGB/video plane X2@ .
RGB/video unmute entire
plane X2@ *0*B X2@ Vmt00*0 ] Unmute RGB/video plane X2@ .
Audio Mute by Plane
Audio mute X2@ * X# *1Z X2@ Amt X# *1 ] Mute audio output X# .
Audio unmute X2@ * X# *0Z X2@ Amt X# *0 ] Unmute audio for X# .
Read audio mute X2@ * X# Z X(] Read audio output X# .
Audio mute entire plane X2@ *1*Z X2@ Amt00*1 ] Mute all audio on plane X2@ .
Audio unmute entire plane X2@ *0*Z X2@ Amt00*0 ] Unmute all audio on plane X2@ .
View Mute
View output mutes
(entire plane) EX2@ VM } X1$ 1 X1$ 2 ... X1$ n ] View output mute for plane X2@ .
Mut X2@ * X1$ 1 X1$ 2 ... X 1$ n ] Verbose mode 2 or 3
RGB Delay (Triple Action Switching) - for VGA / RGBHV Only
Set RGB Delay (by plane) EX2@ * X# * X1# D } X2@ Out X# • Dly X1#] Set the RGB Delay of output X#
.
Read RGB Delay EX2@ * X# D } X1#]
NOTES:
X@ = Input number 01 – <maximum number of inputs>
X# = Output number 01 – < maximum number of outputs >
X( = Mute status 0 = off
1 = on
X1# = RGB delay interval 10 = maximum (in 0.5 second increments)
X1$ = Video/Audio mute status 0 = no mutes
1 = video mute
2 = audio
3 = video and audio mute
X2@ = Plane number 00 - 15 (16 planes)