Extron Electronics SMX System User Guide - Manual (Page 69)

SMX System MultiMatrix Switcher • SMX Control Software 63
Each tab is selectable and highlights when selected (see figure 31 for an example of audio
inputs and outputs on plane 1).
Figure 31. Audio Inputs and Outputs on Plane 1 — No Ties
Across the top of the main window is the menu bar, and at the right edge of the window,
various selectable buttons are available, depending on the current configuration.
NOTE: Depending on the particular SMX configuration, some menus, submenus, and
buttons may appear grayed out and are not selectable.
Control Program Menus and Pages
There are six top level menu items on the menu bar: File , Tools , Audio-input Config ,
Preferences , Master Reset , and Help .
File menu
This drop-down list (see figure 32) includes the following items: Save Matrix settings
as... , Restore Matrix settings from... , Save This-Session’s settings ,
Restore Last-Session’s Settings , Select printer... , Print Tie Map , and Exit .
Figure 32. File Menu
• Save Matrix settings as... — Select this option to save the current matrix settings
(ties, presets, virtual plane, and audio settings) to a restorable file (*.mtx).