beautypg.com

Command and response table for ip sis commands, Command and response table, For ip sis commands – Extron Electronics SMX System User Guide User Manual

Page 62

background image

SMX System MultiMatrix Switcher • SIS Configuration and Control

56

Command and Response Table for IP SIS Commands

Command

ASCII Command

(Host to Switcher)

Response

(Switcher to Host)

Additional Description

IP Setup Commands

Set unit name

EX5$

CN

}

Ipn

•X5$]

Reset unit name to factory
default

E•

CN

}

Ipn

•X5(]

Read unit name

E

CN

}

X5$]

or

X5(]

Set time and date

EX5%

CT

}

Ipt

•X5%]

See

X5%

Symbol Definitions

on

page 53 for more details.

Read time and date

E

CT

}

X5%]

Set GMT offset

EX5@

CZ

}

Ipz

X5@]

NOTE:

In the command, the divider between hours and minutes can be either a colon or a period. In the response,

the divider is a colon.

Example:

E

8.0CZ

}

Ipz+08:00

]

Read GMT offset

E

CZ

}

X5@]

Set Daylight Saving Time

EX7%

CX

}

Ipx

X7%]

Read Daylight Saving Time

E

CX

}

X7%

]

Set DHCP on

E

1DH

}

Idh1

]

Set DHCP off

E

0DH

}

Idh0

]

NOTE:

Setting DHCP from on to off will reset the IP address to factory default (192.168.254.254).

View DHCP mode

E

DH

}

X5#]

Set IP address

EX5^

CI

}

Ipi

•X5^]

Read IP address

E

CI

}

X5^]

Read hardware address
(MAC)

E

CH

}

X5*]

Iph

•X5*]

00-05-A6-xx-xx-xx = MAC

address

Verbose mode 2 and 3

Read # of open connections

E

CC

}

X8(]

0 - 200 = number of open

connections

NOTES:

X5@

= GMT offset

–12.0 through +14.0 hours and minutes removed from GMT

X5#

= DHCP mode status

0 = off or disabled

1 = on or enabled

X5$

= Unit name

Text string up to 24 characters (A-Z, 0-9, and "-").

Not case sensitive.

X5%

= Time and date (set and read) MM/DD/YY•HH:MM:SS

X5^

= IP/Gateway address nnn.nnn.nnn.nnn, Factory default IP address: 192.168.254.254

X5*

= Hardware (MAC address)

nn.nn.nn.nn.nn.nn

X5(

= Default Name

Combination of model name and last 3 pairs of MAC address

(SMX-00-02-3D)

X7%

= Daylight Saving Time

0 = Daylight Saving Time off or ignore

1 = Daylight Saving Time on (USA)

2 = Daylight SavingsTime on (Europe)

3 = Daylight Saving Time on (Brazil)

X8(

= Number of open connections

0 - 200