Command and response table for sis commands, Command and response table, For sis commands – Extron Electronics SMX System User Guide User Manual
Page 48
SMX System MultiMatrix Switcher • SIS Configuration and Control
42
Command and Response Table for SIS Commands
Command
ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Output Switching by Plane
NOTES:
•
The & tie command for RGBHV and the % tie command for video can be used interchangeably.
•
The ! tie command can be used for switching both video signals and audio signals with the same plane address.
•
The & tie command for RGB and the % tie command for video can be used interchangeably.
•
The & read tie command for RGB and the % read tie command for video can be used interchangeably.
•
Commands can be entered back-to-back in a string with no spaces.
For example: 1*1*1&001*002&001*003*003&001...
The SMX supports 1-, 2-, and 3-digit numeric entries (1*1!, 01*02*02&, or 001*003*003%).
Tie input to an output
(RGBHV)
X2@
*
X@
*
X#
&
X2@
Out
X#
•
In
X@
•
RGB
]
Tie input
X@
to output
X#
on plane
X2@
for RGB signals.
Tie input to an output (Video)
X2@
*
X@
*
X#
%
X2@
Out
X#
•
In
X@
•
Vid
]
T
ie input
X@
to output
X#
on plane
X2@
for Video signals.
Tie input to an output (Audio)
X2@
*
X@
*
X#
$
X2@
Out
X#
•
In
X@
•
Aud
]
Tie input
X@
to output
X#
on plane
X2@
for audio signals.
Tie input to an output (All)
X2@
*
X@
*
X#
!
X2@
Out
X#
•
In
X@
•
All
]
Tie input
X@
to output
X#
on plane
X2@
for all signals.
Tie input to all outputs
(RGBHV)
X2@
*
X@
*
&
X2@
In
X@
•
RGB
]
Tie input
X@
to all outputs on plane
X2@
for RGB signals.
Tie input to all outputs (video)
X2@
*
X@
*
%
X2@
In
X@
•
Vid
]
Tie input
X@
to all outputs on plane
X2@
for video signals.
Tie input to all outputs (audio)
X2@
*
X@
*
$
X2@
In
X@
•
Aud
]
Tie input
X@
to all outputs on plane
X2@
for audio signals.
Tie input to all outputs
(audio and video)
X2@
*
X@
*
!
X2@
In
X@
•
All
]
Tie input
X@
to all outputs on plane
X2@
all signals.
Quick Multiple Tie
Make multiple ties
E
+Q
X2@
*
X@
*
X#
!
...
X2@
*
X@
*
X#
$
}
Qik
]
Make multiple ties with one command
entry.
Example:
E
+Q01*3*4!01*3...
*5%01*3*6$
}
Qik
]
Tie plane 01 input 3 audio and video
signals to outputs 4 (audio and video),
5 (video only), and 6 (audio only).
NOTE:
This command activates all I/O switches simultaneously.
NOTES:
X@
= Input number
01
-
<maximum number of inputs>
00 = untied
X#
= Output number
01
-
<maximum number of outputs>
X2@
= Plane number 00
-
15
= plane address
90
-
99 = virtual plane