beautypg.com

Extron Electronics SMX System User Guide User Manual

Page 80

background image

SMX System MultiMatrix Switcher • SMX Control Software

74

Master-Reset

Select this menu only if a master reset to factory defaults is desired. It opens a warning
window stating the consequences of this action. Click

No

if the reset is not required. Click

Yes

to proceed and complete the reset.

Help

This menu gives access to the SMX Control Program help file, and displays limited SMX
configuration information.

Figure 36.

Help Menu

Select

Contents

to view a help file that can orient you through the various menus and

commands.
The configuration information (not selectable or configurable) section shows:

Model type and slot count (here a 3U SMX with 6 slots and front panel control)

Board signal configuration (here 8x8 video inputs and outputs)

Firmware version (here 1.14)

Login mode (here logged in as administrator)

Unit connection (here IP/LAN with the default IP address)

Select

Firmware Ver. = x.xx

to open two windows.

Figure 37.

Firmware Version and RS-232 Monitor Window

The first shows the SMX main firmware version and build number (version 1.14, build 0041
in the example above).
The second window is the RS-232 monitor which shows the switcher response.